Electrical Conduit
Quick Quotes
for Reiku / Drossbach Products

Standard and custom connectors & connector accessories:
-Electrical connector
-Power connector
-Circular connector
-Push pull connector
-Automotive electrical connector

Aero Electric Connectors
Sunbank Connectors & Accessories
Glenair Connectors & Accessories
Amphenol Connectors - 97 Series
Bendix Pygmy Connectors
Electro Adapter Connectors & Accessories
Deutsch Connectors
ITT Cannon Connectors

Over 40 years of experience as a military & industrial connector manufacturer and distributor.


Email or Quote

EMI/RFI Filtered Connectors, Military MIL-STD-810,and Aerospace DO-160e:
Circular, D-Sub & Micro-D Connector Filter Inserts


"Flex" Filter Inserts

  • "Drop-in" filter solution for military circular and D-Subminiature connectors
  • Chip capacitor filtering with a wide array of capacitances and voltage ratings available
  • Simple installation in your existing connector
  • Cost effective, providing simple and immediate solutions

Filtered Military Circular Connectors

  • AS50151, MIL-DTL-38999, MIL-DTL-26482, MIL-DTL-83723
  • Available with chip capacitor up through Pi filtering
  • Available with solder cup, PC tail and wired terminations
  • Maximize your EMI filtering by customizing the filter on a pin by pin basis.




Filtered D-Subminiature and Micro-D Connectors

  • Available with chip capacitor up through Pi filtering
  • Many termination and hardware options available
  • Custom configurations available

Custom Filtering Solutions

  • Custom EMI filtering and transient suppression modules
  • Wide variety of filtering and transient protection available
  • Special configurations with RJ-45 or USB terminations
  • Consult factory for details   



Why Filtered Connectors?

  • Simple cost effective solution to help meet EMI/RFI compatibility requirements
  • Best location for filtering is at the interface, which means inside the connector
  • Easy add on or replacement to help meet your EMI performance Needs
  • Helps reduce volume inside the unit as well as circuit board space
  • Meets military standard and aerospace environmental requirements (MIL-STD-810 and DO-160)
  • Improves overall reliability due to fewer solder joints and few interconnections
  • Insures that the fragile filtering components are well protected inside the connector
  • Parts are shipped 100% tested from the factory to insure proper performance and quality

Our specialty: "FLEX" Filter Inserts for military circular and D-Subminiature connectors, Filtered Military Circular Connectors, D-Subminiature and Micro-D Connector Filtering, Custom EMI/RFI Connector Filtering Solutions.

EMI/RFI Filtered Connectors, Military MIL-STD-810,and Aerospace DO-160e

Types of Connector Filtering and the Performance of Filtered Connectors

Filtered Connector Part Numbers - Circular, D-Sub, and Micro-D Connectors

| Reiku Drossbach at a Glance | Overview | Drossbach Convoluted Tubing | Wire Loom, Split Wire Loom | High Tech Reiku Electrical Conduit | Reiku Corrugated Tubing | Cable Protection | Cable SheathingConduit Fittings, Connectors & Distributors | Heat Protection Materials | Fine Braided Cable Jackets / Cable Protection Sleeving | Materials, Resistance to Chemicals, Modes of Protection | Quality & Tests | US Electrical Connector Manufacturer | Custom Connectors | Connector Distribution Division | Connector Database - Register for Free | Free Connector Consultation Service | Request a Quote |Featured: | Aero Electric Connectors | Sunbank Backshells & Accessories | Amphenol - Pyle National - Matrix - Bendix Connectors | Glenair Backshells & Accessories | Amphenol 97 Series Connectors | Bendix Pygmy Connectors | Electro Adapter Backshells & Accessories | Deutsch Connectors | ITT Cannon Plugs | Our Connector Accessories CatalogBackshells | Bulkhead Adapters | Conduit Fittings | Dummy Receptacles, Dust Caps, etc | Electro Adapter Connector Accessories | Glenair Connector Accessories | Sunbank Connector Accessories | RF EMI Shielding Connector Gaskets, Environmental Seal GasketsEMI / RFI Shield Termination Bands / Termination Straps | Band It Termination Bands - Tie Dex & Micro Tie Dex | Chomerics Gaskets | SPIRA Gaskets | National Power & Signal Gaskets | SAS Industries Gaskets | Our Online Catalogs (PDF) | SC-101 Power Connectors | SC-201 Miniature Connectors | SC-301 Reverse Bayonet Connectors | SC-401 Connector Accessories | SC-CREF Master Cross Reference* |

| Lifetime Warranty for Military & Industrial Connectors | Home | Contact Us | E-Mail |

Relevant MIL  Standards: Navy connectors, AS95234/1W10sl3p,, Amphenol Aerospace connectors,Amphenol connectors, Amphenol cylindrical connectors, Amphenol  Miniature connectors, Integrated connectors, Reverse bayonet connectors, Backshells MIL-DTL-85049, Backshells AS85049, Glenair Backshells MIL-DTL-85049, Sunbank  Backshells MIL-DTL-85049, Subminiature  Amphenol connectors, MIL -dtl-22992, AS95234 connectors, AS95234 reverse bayonet connectors, Thermocouple contacts MIL-DTL-39029,  MIL-DTL-26482. Series II. MIL-C-81703. Series III. MIL-DTL-83723. Series I & III. MIL-DTL-83733, M39029/9 -.132. P09-2020-615E, thermocouple manufacturers, MIL -C-5015, MIL-DTL-38999, M39029, AS39029, MIL-DTL-26482, MIL-DTL-22992, MIL-DTL-83723, M39029 /  AS39029 Military contacts, RFI / EMI Shield Termination Bands, RFI / EMI Shield Termination Straps,  emi/rfi-connector-bands, emi/rfi-connector-straps, EMI Bands / EMI Straps, RFI Bands / RFI Straps, Spacecraft M85049 termination bands, Spacecraft M85049 termination straps.

Copyright All Rights Reserved