Connector Accessories from Sunbank
We offer connector accessories from Sunbank. Sunbank has developed backshells for ALL cylindrical, MIL-SPEC connectors that will not
loosen, even in the most dynamic vibration environments! Imagine the cost savings you will realize not having to use locking compounds, adhesives, lockwire, etc. Truly, this is a "Set and
Forget" system! Tested and Qualified for use by the Military and Major OEM's, world wide.
Please see below the Sunbank connector accessories. For a free consultation or a quote, please contact us.
Self-Seating connector accessories from Sunbank:
03 - Band Adapter Products provide an economical (fully 360°) approach to terminating overall, and / or, individual cable shielding,
especially where future maintenance or reparability are required.
06 - Shrink Boot Adapter Products are configured to accommodate heat-activated, or cold, shrink boots / shapes. These
adapters can be provided with pre-terminated braided shielding.
09 - Strain Relief Adapter Products provide a mechanical cable bundle clamping for light, medium, and heavy duty
applications. 90° Designs are also offered for most available connectors.
12 - Adapter Extender Products allow for a greater amount of working area, behind the connector, while allowing the
use of the provided strain relief.
15 - Non Environmental Adapter Products are designed with provisions for strain relief, and straight, 45°, and 90° options.
18 - Environmental
Adapter Products are designed for cable sealing or moisture resistance, with a selection of available strain relief clamps, and provisions for straight, 45°, and 90° options. Note: Cable Sealing =
Fluid Immersion; Moisture Resistant = Splash-Proof and Dust Resisting
21 - EMI/RFI Adapter Products provide individual and/or overall shield termination for optimal continuity. Products are
offered with choice of strain relief, and provisions for straight, 45°, and 90° options.
24 - EMI/RFI Environmental Products offer the combination of options available in Product Series 18,
and 21. The end result is a shield terminating, envi-ronment resisting design, with strain relief, and orientation options.
33 - EMI/RFI Spring Adapter Products offer termination and
grounding for cables utilizing metal foil and/or shield braid, for overall cable shielding. The cable circumference is completely grounded to the adapter via the peripheral spring component
36 - Shorting Can Adapter Products provide an enclosed protective area, behind the connector, for the assembly of test connectors and shorting plug assemblies.
39 - Pipe
thread Adapter Products are designed to fit most National Pipe Thread (NPT) standardized parts (i.e. Hose Fittings, Conduit).
51 - Lamp Base Adapter Products are designed to provide cable
bundle shield termination, via 360° compression form and opposing threaded compression nut. To complete the assembly, the use of a heat-activated, or cold, shrink boot is suggested, for jacketed,
57 - Commercial Conduit Product Adapters allow for field installable termination of Sealtite® (Liquidtite® ) conduit, typically associated with most Industrial
90 - Accessory Hardware Products allow for the completed assembly of, or repair of, various interconnect system situations.
99 - Assembly Tool Products are designed to
support the need of today's Interconnect Product lines. All JSC tools provide cost effective, consistent, high reliability performance, needed for today's Military / Aerospace environment.
Sunflex Flexible Conduit Systems from Sunbank;
Standard Convolution, Standard Wall Conduits.
Extra Flexible Convolution,
Standard Wall Conduits.
Extra Flexible Convolution, Thin Wall Conduits.
Extra Flexible Convolution, With
Phosphor Bronze or Stainless Steel Wire Overbraid
Tinned Copper Wire Braid and
Overbraid of Nomex or Dacron
Tinned Copper and Phosphor Bronze Wire Braid, with Elastomer Outer Sheath.
CONDUIT ADAPTORS AND TRANSITIONS
and Clamp Adaptor Assembly
Female Adaptor Assembly
Connector Adaptor Assembly
Female Adaptors Elbows
Connector Adaptors Elbows
Rectangular Connector Accessories from Sunbank
Solid D-Sub Miniature Backshells and Accessories (MIL-C-24308)
Split D-Sub Miniature Backshells and Accessories (MIL-C-24308)
Micro D-Sub Miniature Backshells and Accessories (MIL-C-83513)
Arinc Backshells and Accessories (MIL-C-81659)
Composite Interconnect Accessories from Sunbank
Sunbank offers composite interconnect accessories manufactured from high-grade thermoplastics, which meet both military and commercial
aerospace requirements. These accessories are available in either "Self Seating" or self-locking configurations and offer additional weight savings and increased mechanical integrity in
hazardous corrosive environments when compared to aluminum components.
Connectors are our only business! Contact us today for a free consultation or a quote.